 |
| Home | Contact |
Benzyl Cinnamate or Cinnamein or Cinnamic Acid Benzyl Ester or Benzyl 3-Phenylpropenoate or Benzyl β-phenylacrylate SDS Safety Data Sheet of Supplier Exporter Manufacturers' Representative |
| Email: info@ammol.org |
| Call Toll Free +1-855-552-6665 Toll Free: 1-855-55-AMMOL |
Benzyl Cinnamate or Cinnamein or Cinnamic Acid Benzyl Ester or Benzyl 3-Phenylpropenoate or Benzyl β-phenylacrylate
CAS Number: 103-41-3
Molecular Formula: C16H14O2
Molecular Weight: 238.28
Benzyl Cinnamate or Cinnamein or Cinnamic Acid Benzyl Ester or Benzyl 3-Phenylpropenoate or Benzyl β-phenylacrylate
Benzyl Cinnamate or Cinnamein or Cinnamic Acid Benzyl Ester or Benzyl 3-Phenylpropenoate or Benzyl β-Phenylacrylate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
Section 1: Product and Company Identification
Product Name & Other Names: Benzyl Cinnamate or Cinnamein orCinnamic Acid Benzyl Ester or Benzyl 3-Phenylpropenoate or Benzyl β-Phenylacrylate.
CAS No.: 103-41-3
EINECS, EC Number: 203-109-3
Molecular Weight: 238.28
Chemical Formula: C16H14O2
Relevant uses and uses advised against (if any): Laboratory chemicals, Manufacture of substances
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin sensitization (Category 1), H317
Chronic aquatic toxicity (Category 1), H410
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements Irritant | GHS Label Elements Aquatic Hazard |
Signal Words: Danger
Hazard Statements:
H317: May cause an allergic skin reaction.
H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264 Wash thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P391: Collect spillage.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.
Section 3: Composition / Information on Ingredients
Product Name & Other Names: Benzyl Cinnamate or Cinnamein or Cinnamic Acid Benzyl Ester or Benzyl 3-Phenylpropenoate or Benzyl β-Phenylacrylate.
CAS No.: 103-41-3
EINECS, EC Number: 203-109-3
Section 4: First Aid Measures
Always seek medical attention after first aid measures are provided.
Eyes: Immediately flush eyes with excess water for 15 minutes, lifting lower and upper eyelids occasionally.
Skin: Immediately flush skin with excess water for 15 minutes while removing contaminated clothing.
Ingestion: Call Emergency Medical immediately. Rinse mouth with cold water. Give victim 1-2 cups of water or milk to drink.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration.
Section 5: Fire Fighting Measures
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide.
Protective equipment and precautions for firefighters: Use water spray, foam, or dry chemical to extinguish fire. Firefighters should wear full firefighting turn-out gear and respiratory protection. Cool container with water spray.
Special hazards arising from the substance: Carbon oxides and fumes.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
Section 6: Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Do not inhale dust, vapor, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container.
Section 7: Handling and Storage Green
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents. Storage: Keep the container tightly sealed containers to prevent exposure to air and humidity, in a well-ventilated place. Store away from strong oxidizing agents and heat sources.
Section 8: Exposure Controls / Personal Protection
Exposure guidelines: Not established by regulating bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
Section 9: Physical and Chemical Properties
Physical state and appearance: Crystalline white to off-white powder.
Odor: Sweet.
Odor threshold: Not available.
pH (1% soln/water): Not available.
Relative density: Not available.
Melting Point: Between 33C and 35C.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in most fixed oils and ethanol; insoluble or practically insoluble in glycerin, propylene glycol.
Viscosity: Not available.
Section 10: Stability and Reactivity
Stability: Stable under normal conditions of use and storage.
Incompatibility: Heat and strong oxidizing agents.
Hazardous Decomposition Products: Carbon oxides and fumes.
Hazardous Polymerization: Has not been reported.
Section 11: Toxicology Information
LD50 Oral - Rat - 3280 mg/kg.
LD50 Dermal - Rabbit - >3.000 mg/kg.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
May causes damage to organs (Kidney) through prolonged or repeated exposure.
Reproductive Effects: No information available.
Developmental Effects: No information available.
Teratogenicity: No information available.
Section 12: Ecological Information
Toxicity to daphnia and other aquatic invertebrates: static testEC50 - Daphnia magna (Water flea) - 2,8 mg/l - 48 h.
Ecotoxicity (aquatic and terrestrial): Toxic to terrestrial and aquatic plants and animals. Do not release to environment.
Results of PBT and vPvB assessment: Not PBT or vPvB.
Section 13: Disposal Considerations
Check with all applicable local, regional, and national laws and regulations.
Section 14: Transport Information
DOT USA, TDG Canada & ADR/RID Europe:
UN-No: UN3077
Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (benzyl cinnamate).
Hazard Class: 9; Packing Group: III
IATA & IMDG/IMO
UN-No: UN3077
Proper Shipping Name: Environmentally hazardous substance, solid, n.o.s. (benzyl cinnamate).
Hazard Class: 9; Packing Group: III.
Section 15: Regulatory Information
USA:
SARA 311/312 Hazard Categories: Aquatic Hazard, Acqute Health Hazard.
California Proposition 65: Not listed.
Section 16: Other Information
DISCLAIMER: The information and recommendations set forth herein are presented in good faith and believed correct as of the date hereof. It is compiled from various sources, and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules, or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a professionally trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org