 |
| Home | Contact |
Dimethyl Cocamine or Coco Dimethyl Amine or Cocoalkyl Dimethylamine Supplier Exporter Manufacturers' Representative |
| Email: info@ammol.org |
| Call Toll Free +1-855-552-6665 Toll Free: 1-855-55-AMMOL |
Dimethyl Cocamine or Coco Dimethyl Amine or Cocoalkyl Dimethylamine
CAS Number: 61788-93-0
Dimethyl Cocamine or Coco Dimethyl Amine or Cocoalkyl Dimethylamine
Cocoalkyl Dimethylamine or Dimethyl Cocamine or C12/C14 Dimethyl Amine or LDMA/CDMA SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Product Name & Other Names: Cocoalkyl Dimethylamine or Dimethyl Cocamine or C12/C14 Dimethyl Amine or LDMA/CDMA.
CAS No.: 61788-93-0
EINECS EC Code: 263-020-0
Relevant uses and uses advised against (if any): Fracturing and Industrial Manufacturing Use.
Supplier: American Molecules, 9910 Bent Oak Dr, Houston, TX 77040, USA.
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665.
In case of emergency contact: Will be given with the supply.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H302
Skin corrosion/irritation Category 1A, B, C H314
Short-term (acute) aquatic hazard (Category 1), H400
Labeling according to GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements Marine Pollutant | GHS Label Elements Corrosive |
Signal Words: Danger
Hazard statements:
H302: Harmful if swallowed
H314: Causes severe skin burns and eye damage.
H400: Very toxic to aquatic life.
Precautionary statements:
P261: Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P301+P330+ P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314: Get Medical advice/attention if you feel unwell.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P501: Dispose of contents/ container to an approved waste disposal plant.
3. Composition/Information on Ingredients
Product Name & Other Names: Cocoalkyl Dimethylamine or Dimethyl Cocamine or C12/C14 Dimethyl Amine or LDMA/CDMA.
CAS No.: 61788-93-0
EINECS EC Code: 263-020-0
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Ingestion can cause gastrointestinal irritation, nausea, vomiting and diarrhea. Contact medical center quickly. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Causes corrosive burns. Brief exposures may cause irritation and defatting of the skin. Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reusing. Thoroughly clean shoes before reuse.
Eye Contact: Causes burns and may result in permanent injury to eyes including blindness. Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Toxic fumes, nitrogen oxides, and carbon monoxide may be formed in fire. Explosive mixtures can form with air. Combustion products are toxic. Solvent vapors can travel to an ignition source and flash back.
Fire Extinguishing Media: Dry chemical, foam, carbon dioxide or water fog. Solid water streams Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
6. Accidental Release Measures
Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Ensure adequate ventilation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Environmental precautions: Do not let the product enter drains, soil or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Isolate spill or leak area immediately. Keep unauthorized personnel away. Stay upwind. Keep out of low areas where vapors may accumulate. Eliminate all ignition sources (no smoking, flares, sparks, or flames) in immediate area. Keep away from heat. Keep away from sources of ignition. Provide ventilation. Prevent entry into waterways, sewers, basements, or confined areas. Cover with dry earth, sand or other non-combustible material and transfer to containers.Use clean non-sparking tools to collect absorbed material.
7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling it. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.).
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original containers. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like acids, oxidizing agents, heat, and sparks.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: Not established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and engineering controls are not feasible, consult an industrial hygienist.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full-face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice.
9. Physical and Chemical Properties
Appearance: Clear liquid.
Odor: Amine like.
Odor threshold: Not available.
pH of aqueous solutions: Not available.
Relative density: Not available.
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Insoluble in water.
Viscosity: Not available.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Carbon dioxide, carbon monoxide, nitrogen oxides, and toxic fumes may form when heated to decomposition.
Hazardous Polymerization: Not reported. However, it can explode under certain conditions.
Incompatibilities: Oxidizing agents, heat, and sparks.
Conditions to Avoid: Heat, flames, ignition sources, moisture, and incompatibles.
11. Toxicological Information
Acute toxicity: Not available. However, it is harmful if swallowed.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, ACGIH, NTP or OSHA.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. Ecological Information
Toxicity to fish: Not available.
Environmental Toxicity: Very Toxic to aquatic organisms.
Persistence and Degradability: Not available.
Bioaccumulation/ Accumulation: Not available.
Mobility: Not available.
Results of PBT and vPvB assessment: Not available.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Dispose of containers and unused contents in accordance with federal, state, and local requirements. Follow all the pollution control rules.
14. Transport Information
DOT USA, TDG Canada & ADR/RID Europe
Hazard Class: 8 Corrosive
Proper Shipping Name: UN 2735, Amines, liquid, corrosive, n.o.s. (Alkyl(C12-C14) Dimethylamine), 8, PG II.
IMDG/IMP & IATA Hazard Class:
Hazard Class: 8 Corrosive
Proper Shipping Name: UN 2735, Amines, liquid, corrosive, n.o.s. (Alkyl(C12-C14) Dimethylamine), 8, PG II.
15. Regulatory Information
USA:
SARA 311/312 Hazards: See section 2.
California Prop 65: Not listed.
Section 16 - Additional Information
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************
American Molecules, also known as ammol.org is a distributor, supplier and manufacturers' representative of all types of Pharmaceuticals, Functional Ingredients, Excipients and Specialty Chemicals in Texas USA. Our principals manufacture supply and export USP NF BP, Ph Eur, etc grades of chemicals pure and reagent grade, mineral fortifiers, FCC food grade. Tailor made particle size and customized specifications are offered. The principal's facility is having one or more of the certifications like FDA approval and GLP, cGMP, ISO9001, ISO14001, ISO/IEC 17025, ISO22000, FSSC 22000, ISO45001, FSSAI, Kosher, HALAL, COPP, WHO-GMP certified and Written Confirmation (WC) for export to Europe is available. The manufacturers suppliers and exporters observe WHO Good Manufacturing Practices and Good Laboratory Practices.
Suppliers and Manufacturers' Representative:
9910 Bent Oak Dr
Houston, TX 77040, USA
Call Toll Free: 1-855-55-AMMOL 1-855-552-6665
Email: info@ammol.org